Your Subtitle text
KELLY RYAN EQUIPMENT - BAGGER TENDERS, FEEDERS, SPREADERS
Click here to request a quote on any line of equipment you are interested in.
BAGGER TENDER - DUMP BIG LOADS OF FORAGE AND
GO BACK FOR MORE!
Benefits:
- The moving hopper takes larger, heavier loads than a mounted platform on a bagger
- Perfect for filling upright silos
- Great for any material that needs to be uniformly fed into any system
- Apron speed infinitely variable from either tractor seat
- Self-contained hydraulics available on either size
- Towing tongue removable for normal use
Standard Features, 14-Ton Unit:
- Inside dimensions: 10’ X 16’ long X 3 1/2' deep
- Double 667H floor chains (4)
- 10-ton running-gear steering axle
- Discharge full loads in as little as 6 minutes.
- 3 hydraulic-drive motors, no gearboxes
- Safety shields on all drives
- Double-formed box channel center floor support
- 7,000-lb. jack with wheel on each
- Side to relieve the load on the skid
Standard Features, 17-Ton Unit:
- Inside dimensions: 10’ X 20’ long X 3 1/2' deep
- Double 667X floor chains (4)
- 12-ton running-gear steering axle
- Discharge full loads in as little as 7 1/2 minutes!
- 3 hydraulic-drive motors, no gearboxes
- Safety shields on all drives
- Double-formed box channel center floor support
- 7,000-lb. jack with wheel on each
- side to relieve the load on the skid
MANURE SPREADER - 4', 5', 6', and 7' MODELS AVAILABLE!
Kelly Ryan 4’ & 5’ Manure Spreaders
Standard Features on 4’ Units:
- 14-gauge sides
- 11-gauge floor
- High-speed beater drum with hardened-steel bolt-on replacement knives
- 67H or 667H apron chain
Standard Features on 5’ Units:
- 11-gauge floor and sides
- High-speed beater drum with hardened-steel bolt-on replacement knives
- 667H apron chain
Optional Features on All 4’ & 5’ Units:
- Shear pin PTO
- Hydraulic slop gate
- Plastic liner
- Truck-mount units also available in 5’ x 12’ and 5’ x 13’ 6” sizes
Kelly Ryan 6’ & 7’ Manure Spreaders Benefits:
- All welded construction assures you years of trouble-free service.
- Units are shipped assembled and ready for the field
Standard Features on 6’ Units:
- Heavy-duty 8-bolt axles mounted on springs, eliminates the shock factor, which causes axle breakage
- Beaters equipped with reversible and replaceable hardened steel flails
- Heavy-duty 67H11 apron chains designed specifically for handling manure
- (optional on 6’ X 13’6”)
Standard Features on 7’ Units:
- • Heavy-duty 8-bolt axles mounted on springs, eliminates the shock factor, which causes axle breakage
- Beaters equipped with reversible and replaceable hardened steel flails
Optional Features on all 6’ & 7’ Units:
- Shear pin PTO
- Hydraulic slop gate
- Plastic liner
- Hydraulic endgate for semi-liquid manure with 18” double-acting cylinder, rubber belting provides positive seal between box and gate
FEED-R-WAGON - THE EASIEST, LOWEST COST FEEDWAGON AVAILABLE!
A workhorse in countless feedlots and dairies across the
- Over 30,000 in daily use
- Trouble-free chain and flight action
- All-steel welded construction
- Chain speeds are engineered to blend ingredients as they unload.
- Standard Features:
- Strong apron chain (pintle on 5’ widths) where a slow, steady drag is required.
- Lift chain is high-speed roller for smooth action and long life
- High-strength axles, spindles and hubs
- Oil bath gearbox
- Shear pin PTO
Kelly Ryan 69LP Re-Mix Feedwagon
Benefits:
- Ingredients are returned to the box and completely blended before unloading.
- Mixes additives evenly throughout the load
- All chains and stub recycle auger run in unison for optimum capacity
- Mixing time — 4 to 5 minutes
- Trouble-free chain and flight action
- All-steel welded construction
- Low profile for easy loading
- Low power for easy mixing
- Easy control of feed placement with
- Less spillage or over-filling
Standard Features:
- High visibility front discharge with overhang spout
- Strong apron chain (pintle on 5’ widths) where a slow, steady drag is required
- Lift chain is high-speed roller for smooth action and long life
- High-strength axles, spindles and hubs
- Oil bath gearbox
- Shear pin PTO
